ACS A1040 MIRA 3D PRO
The A1040 MIRA 3D PRO is a state-of-the-art ultrasonic tomograph designed for non-destructive testing (NDT) of concrete structures. It utilizes advanced Full Matrix Capture (FMC) and Total Focusing Method (TFM) for real-time 3D imaging, providing detailed insights into the internal structure of the material.
Main features and benefits
Deep penetration: Measures concrete thickness up to 6 meters, depending on concrete quality and degree of reinforcement.
Real-time 3D imaging: Uses FMC/TFM technology to generate detailed 3D images of the internal structure of the concrete.
Long battery life: Up to 10 hours of continuous operation on a single charge.
Robust design: Compact and lightweight, weighing approximately 3.5 kg without handle.
Easy data transfer: USB interface for fast data transfer to PC.
Easy-to-use software: Includes INTROVIEW® software for 3D visualization and analysis.
Versatile application: Suitable for inspecting concrete, stone, composites and other materials.
Technical specifications
Transducers: 32 active low frequency shear wave transducers with ceramic wear tips.
Frequency range: 10–100 kHz, nominal frequency 50 kHz.
Ultrasonic velocity: 1,000–4,000 m/s (shear wave).
Dimensions: 200 × 125 × 100 mm (without handle); 400 × 125 × 100 mm (with two antennas).
Weight: 3.5 kg (without handle); 5.6 kg (with two antennas).
Operating temperature: –10 °C to +50 °C, relative humidity < 95%.
Error margin: ± (0.05 × H + 10) mm, where H is the measured depth.
Applications and analysis modes
Thickness measurement: Accurate measurement of concrete thickness, even when accessed from one side.
Reinforcement location: Identification and mapping of reinforcement, tendon tubes, cables and other structural elements.
Flaw detection: Detection of voids, cracks, poor adhesion and other defects in the concrete.
Grouting defects: Identification of inadequate grouting in tendon tubes and coupling components.
Material assessment: Evaluation of structural materials such as stone, composites, and wood.