MR88 AMS Remover is an alcohol-based solvent designed for the removal of penetrant in penetrant testing. This product meets the requirements of EN ISO and ASTM standards, is classified as AMS 2644 Class 2, and is designed to be less harmful with low toxicity and slow drying time. Removal is residue-free and works well on metals — use on plastics must be tested first.

Key features and benefits

• Class 2 in AMS 2644 certification for penetrant testing.

• Method C according to EN ISO standards for cleaning/removal.

• Alcohol mixture that dries slowly and leaves no residue.

• Less toxic than many other solvents, without hydrocarbons.

• Aerosol version can be used in all directions (360°), so spraying is also possible up/down.

Technical specifications

• Approvals: EN ISO 3452-2, EN ISO 3452-6, AMS 2644, ASTM E1417, ASTM E165, ASME Code V, RCC-M, and more.

• Shelf life: 3 years when stored at appropriate temperature.

• Storage temperature: between +5 °C and +45 °C.

• Operating temperature: from −30 °C up to +52 °C.

• Delivery forms: aerosol (500 ml), bulk containers (5 L, 30 L, 200 L), and “Piccolo-Pen” for smaller applications.

Areas of application

• Removal of penetrant excess in penetrant testing after the penetrant time phase.

• Suitable for industrial use on metals where testing requires strict standard compliance.

• Situations where residue-free and low toxicity are important criteria.

• Temperature variation: suitable for use in environments with low temperatures (down to −30 °C) and up to moderate heat.