The Waygate Technologies Eresco 52 MF4-CL is a rugged, air-cooled portable X-ray generator designed for demanding field use in harsh environments. With its multilateral beam spread and high voltage, it provides high image quality for inspections through materials such as steel, while ensuring operational reliability and ease of use.

Technical specifications

• Voltage: 5–300 kV, with maximum power of 600 W

• Focus size: 0.5 × 5.5 mm according to EN 12543

• Steel Penetration: Up to 52 mm steel (10 min exposure at 2.0 mA and 700 mm focus-plate distance with Agfa D7 film)

• Beam spread: 38° vertical × 360° horizontal panoramic beam

• Tube and cooling system: Metal-ceramic structured tube and optimal air cooling for 100% duty cycle at 30°C

• Operating stability: ±1% in current and voltage

• Power supply: Max. 1.4 kVA, operation via modern power electronics

• Temperature tolerance: Operation from –20°C to +50°C; storage from –30°C to +80°C

• Protection and quality: IP65 rated, CE marked and manufactured under ISO 9001 standards

• Weight: Approx. 33.8 kg (without handle); X-ray tube head has a diameter of approx. 225 mm

• Additional safety features: Automatic heating via real-time clock and built-in alarm signaling in the event of a fault

• Application Adaptation: Compatible with “MF4 Control” or PC software for remote control and analysis

Benefits

• Precise inspection with 0.5 × 5.5 mm focus – ideal for detailed defect detection

• Full panoramic coverage (360° beam) improves image consistency without moving equipment

• Rugged and field-ready, withstands dust, splashes and varying temperatures

• High beam quality and operational reliability — stable 600 W output even under high load

• Easy integration with modern control systems for more efficient use

The CP300DS delivers sharp and precise digital radiography thanks to its small 1 mm focal spot and high voltage range (30–300 kV). Its robust metal-ceramic tube construction, built-in carousel and 100% duty cycle at 30°C make it an ideal choice for demanding NDT inspections.

Key features:

• Output voltage: 30–300 kV with constant power mode.

• Tube voltage: 0.5–6 mA (3 mA at full power), maximum power 900 W.

• Steel penetration: up to 66 mm in less than 10 minutes.

• Weight: approximately 29 kg.

• Small focal length (optical): 1 mm provides crystal clear images.

• Built-in 5-position carousel for quick jet changes.

• 100% duty cycle at 30°C with IP65 rating for rugged, continuous use.

• Operating temperature: −30°C to +60°C; storage: −40°C to +70°C.

• Compatible with "PowerBox" control unit and digital inspect software.

The Teledyne ICM CP160D is the lightest and most compact generator in the CP series , ideal for demanding NDT tasks. With a built-in beryllium window and high voltage capability, it delivers impressive precision for both light alloys and thicker steels. It is fully rugged, with an IP65 rating and continuous operation at normal ambient temperatures.

Key features:

• Variable output voltage from 10 to 160 kV and current from 1 to 10 mA , with constant power mode of 900 W.

• Penetration capacity up to 29 mm steel at standard conditions (700 mm FFD, film D2).

• Capable of continuous operation at 30°C , thanks to reliable thermal management.

• Low weight of 14.7 kg and compact design (Ø 140 mm × 725 mm) – very user-friendly.

• Very low X-ray leakage with dose < 2.0 mSv/h at 1 m distance.

• Precise optical focal spot (approx. 3 mm), and directional, elliptical beam opening (60° × 40°).

• Built-in carousel with five outputs, two guard rings and IP65 waterproofing.

• Working temperature resistant from –30 °C to +60 °C (storage down to –40 °C).

• Low beam rate and high sports ring/signal strength provide reliable performance in the field and industry.

The Teledyne ICM CP120B and CP160B are two lightweight battery-powered X-ray tubes ideal for short, repeated exposures in demanding NDT applications.

CP120B – Lightweight and precise mobile solution

• Voltage and current: 40–120 kV at 0.1–1.0 mA, up to 120 W power.

• Penetration ability: Pierces approximately 10 mm of steel with short exposure.

• Weight and size: Only 7.5 kg, with compact diameter (124 mm) and length (~476 mm).

• Graduated beam: Narrow, precision-focused beam (0.8 × 0.5 mm).

• Robust design: Protection against water and dust (IP54), operates from –25°C to +50°C.

• Use: Ideal for short, repeated exposures in demanding NDT applications.

CP160B – More power, just as portable

• Voltage and current: 40–160 kV at 0.1–0.5 mA, max. 80 W power.

• Penetration ability: Covers approximately 21 mm of steel.

• Weight: Approximately 9.2 kg.

• Beam: 0.8 × 0.7 mm focal spot.

• Use: More powerful option that is still lightweight and portable.

The Waygate Technologies Eresco 200 MF4-R is a rugged and high-performance battery-powered X-ray tube designed for industrial radiography in demanding field environments. With its compact design, low weight and high power, it is ideal for inspection of welds, castings and complex structures.

Key features

• 200 kV high penetration X-ray tube

• Extremely small 1 mm focus for high image quality and sharp details

• Robust, shockproof housing for field use

• Integrated digital control unit for easy operation

• Can be used with both film and digital detector systems

• Optimal cooling for continuous operation

Technical data

• Tube voltage: up to 200 kV

• Focus size: 1 mm

• Power supply: battery-powered and mains operation possible

• Weight: low for easy transport and field use

• Operating temperature: wide temperature range for demanding environments

• Cooling system: air-cooled for stable performance

Benefits

• Provides clear and accurate images for precise defect detection

• Flexible in use, both stationary and portable

• Requires minimal maintenance thanks to reliable design

The Teledyne ICM CP300DM is a powerful, compact and robust portable X-ray generator – designed for reliable digital radiography in demanding field environments. Thanks to its metal-ceramic tube and precise control system, it provides long-term stability, high penetration and uninterrupted operation.

Key features:

• Voltage : Variable from 30 to 300 kV

• Current strength : 0.5 to 10 mA (standard use at 3 mA)

• Peak power : Up to 900 W at the anode

• Penetration capacity : Penetrates up to 66 mm of steel – providing clear inspection even in thick materials

• Durability : 100% duty cycle at 30°C – stable during long-term use

• Weight and form factor : Approx. 29 kg with compact dimensions (Ø 180 × 837 mm)

• Beam pattern : Directional (60° × 40° ellipse) with built-in five-position carousel for control

• Safety : Low leakage radiation and protected with IP65 rating for harsh environments

• Temperature range : Operation from −30 °C to 60 °C and storage from −40 °C to 70 °C – flexible in extreme conditions

• Fine resolution : Focal point of 3 mm according to EN12543 standard

• Filter and construction : Beryllium window with 0.8 mm inherent filtration and double curtain ring ensures precise control of beam profile

Applications and benefits

• Ideal for digital radiography where high penetration and image clarity are essential, such as inspection of welds, castings and thick-walled industrial equipment

• Durable design for field use – IP65 protection and wide temperature range

• User-friendly control via POWERBOX unit (plug-and-play) and five-position carousel for flexible beam direction

• Efficient and logistics-friendly – despite high performance, compact and light enough for one operator

The Teledyne ICM CP200DS is a compact and powerful portable X-ray generator designed for digital radiography (DR). With a small focusing system of only 1 mm and a weight of 15.9 kg, it delivers sharper images and an industry-leading power-to-weight ratio.

Key Features and Specifications:

• Adjustable voltage: 10–200 kV, and current: 0.5–10 mA (max. 3.7 mA at full power)

• Maximum anode power: 750 W in constant voltage mode

• Continuous operation (100% duty cycle) at an ambient temperature of 30°C

• Penetration: up to approximately 40 mm in steel

• Compact design: diameter 140 mm, length 705 mm — very handy for field work

• 1 mm optical focus (EN 12543 standard) for maximum sharpness and detail resolution

• Integrated rotor with five X-ray outputs for flexibility of use

• Wear-resistant quality: robust metal-ceramic components and IP65-rated housing for use in challenging environments

• Operating range: –30°C to +60°C; storage up to +70°C

• Low leaking radiation dose: below 2 mSv/h at 1 meter distance

Why the 1mm focus is important:

• Reduces image blur and improves image clarity, especially in short-distance digital radiography

• Enables shorter exposure times and higher dose efficiency, resulting in faster workflow and better detection of small defects

Control and use:

• The unit is operated via Teledyne ICM's “PowerBox” control unit with graphical displays and intuitive menus

• It is plug-and-play, shockproof and provides stable operation under demanding conditions, with a wide voltage range (90–264 VAC) and the ability to operate from a car battery via simple DC/AC conversion.

The Waygate Technologies Eresco 42 MF4 is a robust and compact X-ray generator designed for industrial radiography , especially suitable for field use. With its fine 3 mm focus, it delivers sharp and precise images even at geometric magnification, penetrating up to 42 mm of steel with a 10 minute exposure.

Technical specification and features

• Voltage: 5 kV – 200 kV, continuous power of 900 W

• Focus size: 3 mm according to EN 12543 (approx. 1.5 in IEC context)

• Beam: Beryllium window with 40° × 60° elliptical beam pattern

• Tube: Air-cooled, gas-insulated metal-ceramic construction with tungsten anode

• Thermal Management: Optimized air cooling for 100% duty cycle at 30°C (up to 900W)

• Stability: Current and voltage stability of ±1%, providing consistent quality in radiography images

• Safety: Automatic real-time clock watch for heating, fault warning via built-in lamp, designed for field use under harsh environments

• Quality and certification: Manufactured according to ISO 9001, CE certified, and approved according to French NFC and German BfS standards

• Protection: Dustproof and waterproof (IP65), withstands -20 °C to +50 °C in operation, and -30 °C to +80 °C in storage

• Weight and size: Approx. 24.6 kg (without handle), with compact diameter (approx. 160 mm)

Benefits and uses

• Sharp resolution thanks to 3 mm focus — ideal for inspecting welds and composite materials

• High penetration (42 mm steel at 10 min exposure) provides flexibility in use

• Robust air-cooled design enables continuous operation, even in harsh field conditions

• Automatic warm-up and built-in safety features reduce the need for operator intervention

The Waygate Technologies Eresco 300 MF4-R is a rugged, air-cooled portable X-ray system specifically designed for radioscopic inspection with geometric magnification. It combines high penetration with high image resolution and an efficient user experience for inspections in demanding environments.

Main features

• High voltage range: Variable operation from 10 kV to 300 kV, with maximum continuous power of 900 W

• Focus: Narrow 1 mm focus (according to EN 12543), provides accurate and sharp images with improved geometric magnification

• Beamwidth: Wide beam angle of 30° × 60°, ideal for data visualization without panoramic limitations

• Construction: Air-cooled, gas-insulated high-voltage technology with metal-ceramic X-ray tube and beryllium window; dust- and waterproof design (IP65)

• Thermal Management: Optimized airflow system for over 100% duty cycle at 30°C (up to 60 minutes of continuous operation)

• Safety and ease of use: Automatic heating via built-in clock, stabilization of current and voltage ±1%, and built-in alarm light in case of error

Technical specifications

• Power source: Power supply with modern power electronics, requires max. 2.0 kVA

• Stability: ±1% in current and voltage

• Material and quality: CE certified, manufactured under ISO 9001, and meets French and German standard requirements

• Weight: Approx. 37.8 kg (without handle), compact and robust for field use

• Temperature tolerance: Operation between –20°C and +50°C, with storage capability from –30°C to +80°C

• Build and design: Withstands harsh environments with solid metal structure and portable chassis form factor

• Additional tools: Can be used with digital control via Eresco MF4 Control or PC software such as Rhythm Insight RT

One of the world's largest suppliers of easy-to-grow X-ray tubes. From 9kg

The Waygate Technologies Eresco 65 MF4 is a robust and compact portable X-ray generator, designed for demanding field use in industrial radiography and inspection. It combines high voltage, long-term operation and high image quality using a precise 3 mm focal spot.

Technical overview and benefits

• Voltage range and power: 5–300 kV with continuous power of 900 W, providing powerful penetration in various materials.

• Focus size: Only 3 mm (according to EN 12 543), which delivers accurate and detailed images.

• Penetration ability: Penetrates up to 65 mm of steel at 10 minute exposure with AGFA D7 film and 700 mm focus-film distance.

• Beam characteristics: The focal spot is elliptical – approximately 40° × 60° – with a 0.8 mm Be filtration.

• Construction and cooling: Air-cooled and gas-insulated X-ray tube with metal-ceramic emitter; optimal cooling ensures 100% operation at 30°C for up to 60 minutes.

• Stability: Low operating stability of ±1% of voltage and current, ensuring consistent performance and image quality.

• Safety: Integrated real-time clock for automatic heating, condition monitoring and warning light.

• Robustness: Withstands demanding environments with IP65-rated enclosure, operation from –20°C to +50°C and storage capacity from –30°C to +80°C.

• Flexible control: Can be controlled via included “MF4 Control” unit or PC software (Rhythm Insight RT).

• Build and weight: Weight approx. 37.8 kg without handle; compact and portable for mobile use.

The Waygate Technologies Eresco 32 MF4-C is a rugged, air-cooled, portable X-ray unit for high-resolution radiography in challenging conditions. It is optimized for field inspections with geometric magnification and offers reliable performance with a long service life.

Technical overview

• Tube voltage: Variable from 5 to 200 kV with continuous power of 600 W – ideal for detailed inspection tasks.

• Focus size: Only 0.4 × 4.0 mm (EN 12543), provides sharp images – essential for precise defect detection.

• Penetration: Up to 32 mm steel at 10 minutes exposure (with D7 film and 700 mm focus-plate distance).

• Beamwidth: Full circle – 40° × 360° beam, for maximum coverage without repositioning.

• Construction: Gas-insulated metal-ceramic X-ray tube with tungsten anode in robust housing.

• Cooling: Air-cooled with 100% duty cycle at 30°C – enables continuous operation.

• Stability: <1% stability in both current and voltage – ensuring consistent quality.

• Power: Requires max 1 kVA – efficient power supply for field use.

• Protection and use: IP65 rated against dust and water; operating temperature –20°C to +50°C; robust design suitable for active field use.

Advanced features for efficient radiography

• Built-in real-time clock allows heating to be automated – saving time.

• Error monitoring with clear visual warning in case of operational stability failure.

• Compatibility with Rhythm Insight RT software enables PC-based control and data management.